INFLUENCES OF ACID POST-TREATMENT ON THE MORPHOLOGY OF SOAPFREE P（MMA-EA-MAA） PARTICLES PREPARED BY SEEDED EMULSION POLYMERIZATION

Soap-free poly（methyl methacrylate-ethyl acrylate-methacrylic acid） latex particles with narrow size distribution were synthesized by seeded emulsion polymerization, and the porous particles were created by a stepwise alkali/acid treatment method. Effects of acid treatment conditions on the particle morphology were investigated. Results show that one to three pores were formed inside most of particles after post-treatment. At pH 7.0, when the treatment temperature was lower than 70℃, the size of particles and the volume of pores remained almost unchanged, and these two values increased significantly when the temperature was higher than 70℃. Both the particle size and the pore volume decreased with the increase of initial pH value and treatment time in the acid treatment. As the pH was below 4.0 and the treatment time was longer than 180 min, the particles shrunk in size.     

Octasilsesquioxane Chemistry II. Hydrosilylation Reaction of Octa(hydrido)silsesquioxane with Unsaturated Substrates and Product Properties

The hydrosilylation reaction of octa(hydrido)silsesquioxane with ω‐halo‐1‐alkenes and other unsaturated substrates allows attachment of 8 long‐chain functionalized alkyls on the cubic Si₈O₁₂ skeleton. Pt/C and H₂PtCl₆ have been adopted as the catalysts, the yields being 74–98% for compounds 2–9 . For terminal alkenes, the hydrosilylation follows the anti‐Markonikov's rule. The morphological state of 2–9 ranges from viscous liquid to crystalline materials. The pyrolysis results indicate that 7 , a material of hard spherical core and soft flexible shell, may likely act as nanometer‐size ball bearings up to more than 400 °C. The X‐ray structure of 9 reveals that the molecule is required to possess a center of symmetry crystallographically. The linear arms on 9 , except for two of them, are virtually all‐trans in conformation, not counting the ω‐C‐Cl bond.     

A Study on Alkyl Polyglycosides of the Starch

The alkyl polyglycosides (APG) is new type the surfactants that is made by regenerationresource of the starch and the grease, since the nineties of 20th century it is energetically exploited ininternational extent. APG not only good in surface activity, but also plenty on bubble, thin greasyand stabilization, there are good decontamination, compatibility, innocuity, not incitation and uniquefunction that organism decomposition of swiftness and downrightness, and so on.APG is to get production that loses one molecule water with half condensation aldehyde hydroxyand sebum alcohol hydroxy under acid catalysis. The production not is one simplicity compound, butis one of sugar polymerization degree, so it is mixture of the alkyl single glucoside, the alkyl twoglucoside and the alkyl three glucoside.Author synthesizes the surfactants of the alkyl polyglycosides, with the oleaster and potato starchand sebum alcohol, that was chosen to use duality system activator of plant acid and p-toluene-sulfoacid for the first time. The adoption way is that the lower alkyl polyglycosides is firstly formed byreaction of lower alcohol with starch then exchanged with high alcohol to obtain APG. The study isto make certain most technics condition, determining capillary tension and the pastern sheafdeepness of critical, calculating HLB value, determining construction by 1R.To synthesize principium:Peroration :[1]Duality system activator of plant acid and p-toluene-sulfo acid is compare idea activator that was the lower alkyl polyglycosides is firstly formed by reaction of lower alcohol with glucose then exchanged with high alcohol to obtain high alkyl polyglycosides. The advantage is that it overcomes agglomeration, there is reaction entirety, high of sugar transform ratio, reaction time short.[2]Most good reaction temperature is 90～ 170℃, the dosage of activator is 0.5%～0.9%, the mated ratio: The APG of glucose basic butane ratio starch is 5:1, the APG of potato starch basic glycol ratio starch is 6:1, the APG of the oleaster starch basic glycol ratio starch is 12:1, the APG of the mealiest starch basic glycol ratio starch is 6:1, the product of complex is good property.[3]The alkyl polyglycosides is the products of surfactant. IR determines the functional group of the products. On the basis of group of the hydrophile and to close on oil, that the feature peak of α-1, 4- glucoside.[4]The capillary tension of the APG is 26.8～31.0mN/m, the HLB value is 16～18, the products is better emulsifying agent of water- solubility. (O/W).     

Oscillation condition for a series piezoelectric sensor. Application to the determination of urease activity in plant seeds

The oscillating conditions for a series piezoelectric quartz crystal (SPQC) are proposed and verified experimentally. The influence of the cell constant and oscillator phase on the oscillational ability of the SPQC was investigated. It is shown that the SPQC possesses excellent oscillational ability in low or high conductivity solutions, but in solution of intermediate conductivity, the oscillational ability decreases with increasing oscillator phase or decreasing cell constant, sometimes resulting in a cease-to-oscillate zone. The SPQC was applied to determine the urease activity in plant seeds with a detection limit of 0.004 U ml⁻¹, based on the change in conductivity.     

液下单液滴微萃取-高效液相色谱法测定二氯酚

采用液下单液滴微萃取样品处理方法富集水中的2,4-二氯酚和2,6-二氯酚,高效液相色谱法测定.考察了不同萃取剂、萃取条件及测定条件对检测结果的影响.2,4-二氯酚和2,6-二氯酚的线性范围分别在0.001～20 mg/L和0.003～20 mg/L之间,检出限分别为0.001和0.003 mg/L.     

Equivalence of functional-differential equations of neutral type and abstract Cauchy problems

Equivalence of functional-differential equations of neutral type to well-posed abstract Cauchy problems in the state spaces ⁿ }L ^p ,L ^p resp.C is investigated. The assumptions allow non-atomic difference operators.This work was supported by the Fonds zur Förderung der wissenschaftlichen Forschung (Austria) under Grant No. P4534.Work done by this author was done during a stay at the University of Graz from October 1981 till April 1984.     

Host-guest interactions in the supramolecular incorporation of fullerenes into tailored holes on porphyrin-modified gold nanoparticles in molecular photovoltaics

Novel gold nanoparticles modified with a mixed self-assembled monolayer of porphyrin alkanethiol and short-chain alkanethiol were prepared (first step) to examine the size and shape effects of surface holes (host) on porphyrin-modified gold nanoparticles. The porphyrin-modified gold nanoparticles with a size of about 10 nm incorporated C60 molecules (guest) into the large, bucket-shaped holes, leading to the formation of a supramolecular complex of porphyrin-C60 composites (second step). Large composite clusters with a size of 200-400 nm were grown from the supramolecular complex of porphyrin-C60 composites in mixed solvents (third step) and deposited electrophoretically onto nanostructured SnO2 electrodes (fourth step). Differences in the porphyrin:C60 ratio were found to affect the structures and photoelectrochemical properties of the composite clusters in mixed solvents as well as on the SnO2 electrodes. The photoelectrochemical performance of a photoelectrochemical device consisting of SnO2 electrodes modified with the porphyrin-C60 composites was enhanced relative to a reference system with small, wedged-shaped surface holes on the gold nanoparticle. Time-resolved transient absorption spectroscopy with fluorescence lifetime measurements suggest the occurrence of ultrafast electron transfer from the porphyrin excited singlet states to C60 or the formation of a partial charge-transfer state in the composite clusters of supramolecular complexes formed between porphyrin and C60 leading to efficient photocurrent generation in the system. Elucidation of the relationship between host-guest interactions and photoelectrochemical function in the present system will provide valuable information on the design of molecular devices and machines including molecular photovoltaics.